manualshive.com logo in svg

ZyXEL Communications P-2601HN(L)-F1 Series, User Manual

Share
Download
ZyXEL Communications P-2601HN(L)-F1 Series User Manual Download Page 193

 Chapter 16 VoIP

P-2601HN(L)-F1 Series User’s Guide

193

Registration is initiated by the User Agent Client (UAC) running in the VoIP 
gateway (the ZyXEL Device). The gateway must be configured with information 
letting it know where to send the REGISTER message, as well as the relevant user 
and authorization data. 

A SIP registration has a limited lifespan. The User Agent Client must renew its 
registration within this lifespan. If it does not do so, the registration data will be 
deleted from the SIP registrar's database and the connection broken.

The ZyXEL Device attempts to register all enabled subscriber ports when it is 
switched on. When you enable a subscriber port that was previously disabled, the 
ZyXEL Device attempts to register the port immediately.

Authorization Requirements 

SIP registrations (and subsequent SIP requests) require a username and 
password for authorization. These credentials are validated via a challenge / 
response system using the HTTP digest mechanism (as detailed in RFC3261, "SIP: 
Session Initiation Protocol").

SIP Servers

SIP is a client-server protocol. A SIP client is an application program or device that 
sends SIP requests. A SIP server responds to the SIP requests. 

When you use SIP to make a VoIP call, it originates at a client and terminates at a 
server. A SIP client could be a computer or a SIP phone. One device can act as 
both a SIP client and a SIP server. 

SIP User Agent 

A SIP user agent can make and receive VoIP telephone calls. This means that SIP 
can be used for peer-to-peer communications even though it is a client-server 
protocol. In the following figure, either A or B can act as a SIP user agent client to 
initiate a call. A and B can also both act as a SIP user agent to receive the call.

Figure 90   

SIP User Agent

A

B

Summary of Contents for P-2601HN(L)-F1 Series

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands