ZyXEL Communications P-2304R, User Manual

Page: 54 / 300

Chapter 4 Wizard Setup
P-2304R-P1 Series User’s Guide
54
Figure 17 Connection Wizard > System Information
The following table describes the labels in this screen.
4.2.3 ISP Parameters
This screen depends on the Connection Type you select.
Table 12 Connection Wizard > System Information
LABEL DESCRIPTION
System Name Enter your computer's "Computer Name". See Section 18.1 on page 187 for more
information. This is for identification purposes, but some ISPs also check this field.
This name can be up to 30 alphanumeric characters long. Spaces are not allowed,
but dashes “-” and underscores "_" are accepted.
Domain Name Enter the domain name entry that is propagated to DHCP clients on the LAN. If
you leave this blank, the domain name obtained from the ISP is used. Use up to
38 alphanumeric characters. Spaces are not allowed, but dashes “-” and periods
"." are accepted.
< Back Click this to go to the previous screen.
Next > Click this to go to the next screen.
Exit Click this to close this screen and return to the main screen.