ZyXEL Communications ONU-2024 Series, User Manual

Page: 85 / 268

Chapter 8 VLAN
ONU User’s Guide
85
8.3.3 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a
port. See
Section on page 79 for more information on static VLAN. Click the VLAN Port
Setting link in the VLAN Status screen.
Figure 34 Advanced Application > VLAN > VLAN Port Setting
Tagging Select TX Tagging if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
Add Click Add to save your changes to the ONU’s run-time memory. The ONU loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to start configuring the screen again.
VID This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
Active This field indicates whether the VLAN settings are enabled ( Yes ) or disabled ( No ).
Name This field displays the descriptive name for this VLAN group.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
Table 16 Advanced Application > VLAN > Static VLAN (continued)
LABEL DESCRIPTION