ZyXEL Communications ONU-2024 Series, User Manual

Page: 82 / 268

Chapter 8 VLAN
ONU User’s Guide
82
8.2 Select the VLAN Type
Select a VLAN type in the Basic Setting > Switch Setup screen.
Figure 30 Switch Setup: Select VLAN Type
8.3 Static VLAN Status
Use a static VLAN to decide whether an incoming frame on a port should be:
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.
See Section on page 79 for more information on Static VLAN. Click Advanced Application
> VLAN from the navigation panel to display the VLAN Status screen.
Figure 31 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 14 Advanced Application > VLAN: VLAN Status
LABEL DESCRIPTION
The Number of
VLAN This is the number of VLANs configured on the ONU.
Index This is the VLAN index number. Click on an index number to view more VLAN
details.
VID This is the VLAN identification number that was configured in the Static VLAN
screen.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.