ZyXEL Communications ONU-2024 Series, User Manual

Page: 57 / 268

Chapter 5 Initial Setup Example
ONU User’s Guide
57
3
Since the VLAN2 network is connected to port 10 on the ONU, select Fixed to
configure port 10 to be a permanent member of the VLAN only.
4
To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames
properly, clear the
TX Tagging check box to set the ONU to remove VLAN tags before
sending.
5 Click Add to create the static VLAN and click the Save button to save the settings.
5.1.4 Setting Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that the frames
are forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 10 so that any untagged frames
received on that port get sent to VLAN 2.
Figure 20 Initial Setup Network Example: Port VID
1 Click Advanced
Applications and VLAN
in the navigation panel.
Then click the
VLAN
Port Setting link.
2
Enter 2 in the PVID field
for port 10 and click
Apply to set the VLAN
port setting and click the
Save button to save the
settings.