ZyXEL Communications OMC-2301, User Manual

Page: 74 / 224

Chapter 6 Basic Setting
OMC-2301 User’s Guide
74
6.11.1 Port-based VLANs
Port-based VLANs are VLANs where the packet forwarding decision is based on the
destination MAC address and its associated port.
Port-based VLANs require allowed outgoing ports to be defined for each port. Therefore, if
you wish to allow two subscriber ports to talk to each other, for example, between conference
rooms in a hotel, you must define the egress (an egress port is an outgoing port, that is, a port
through which a data packet leaves) for both ports.
Port-based VLANs are specific only to the device on which they were created.
6.12 4-Port ONU Profile
Use the 4-Port ONU Profile screen to create or edit a profile that contains connection and
port-based VLAN settings for a 4-port ONU. Once you have set the profile settings, you can
apply it to the ONU in the
ONU Setup screens (refer to Section 6.9 on page 67 ).
Your OMC comes with a “Default” profile containing settings that work in most network
environment.
When you create a profile having the same name as an existing profile, the previous settings
will be replaced in the existing profile.
Click
Basic Setting > 4-Port ONU Profile to display the configuration screen.