ZyXEL Communications OMC-2301, User Manual

Page: 56 / 224

Chapter 5 System Status and Port Statistics
OMC-2301 User’s Guide
56
Figure 15 Status: Port Details
The following table describes the labels in this screen.
Table 10 Status: Port Details
LABEL DESCRIPTION
Port Info
Port NO. This field displays the Ethernet port index number.
The digit(s) before 0 in a port number corresponds to the card slot on the OLT, and the
last digit denotes the port type (1 for PON port and 2 for uplink port).
Link This field displays whether a device is connected to the Gigabit Ethernet port or not.
Up Time This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packets This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
Pause This field shows the number of 802.3x Pause packets transmitted.
LLID1 This field shows the number of packets transmitted to the ONU.
Rx Packet
The following fields display detailed information about packets received.
RX Packets This field shows the number of good packets (unicast, multicast and broadcast)
received.
Pause This field shows the number of 802.3x Pause packets received.
Error Packet
The following fields display detailed information about packets received that were in error.
Error Packet s The following fields display detailed information about packets received that were in
error.
RX FCS This field shows the number of packets received with a FCS (Frame Check Sequence)
error(s).
Poll
Interval(s)
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval .
Stop Click Stop to stop port statistic polling.