ZyXEL Communications OMC-2301, User Manual

Page: 185 / 224

Chapter 20 Command Examples
OMC-2301 User’s Guide
185
20.9 no Command Examples
These are the commonly used command examples that belong to the
no
group of commands.
20.9.1 no port-access-authenticator
Syntax:
no port-access-authenticator
no port-access-authenticator <port-list>
where
An example is shown next.
• Disable authentication on the OMC.
• Disable authentication on the PON ports in slots one, two and four and the uplink port in
slot three.
20.9.2 no ssh
Syntax:
no ssh key <rsa1|rsa|dsa>
no ssh known-hosts <host-ip>
no ssh known-hosts <host-ip> [1024|ssh-rsa|ssh-dsa]
where
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
= Disables port authentication on the OMC.
<port-list>
= Disables authentication on the listed ports.
sysname(config)# no port-access-authenticator
sysname(config)# no port-access-authenticator 101,201,302,401
key <rsa1|rsa|dsa>
Disables the secure shell server encryption key. Your OMC
supports SSH versions 1 and 2 using RSA and DSA
authentication.
known-hosts <host-ip>
Remove specific remote hosts from the list of all known
hosts.
known-hosts <host-ip>
[1024|ssh-rsa|ssh-dsa]
Remove remote known hosts with a specified public key
(1024-bit RSA1, RSA or DSA).