ZyXEL Communications OMC-2301, User Manual

Page: 184 / 224

Chapter 20 Command Examples
OMC-2301 User’s Guide
184
Use the
reload config
command to restart the system and use a different configuration
file (if specified). The following example restarts the system to use the second configuration
file.
Figure 74 CLI: reload config Command Example
"
When you use the
write memory
command without specifying a configuration
file index number, the OMC saves the changes to the configuration file the
OMC is currently using.
20.8.3 Restoring Configuration
Syntax:
copy tftp config <index> <ip> <remote-file>
where
This command restores the configuration file on the OMC. The following example uploads the
configuration file (
test.cfg
) from the TFTP server (
172.16.19.96
) to the OMC.
20.8.4 Resetting to the Factory Default
Follow the steps below to reset the OMC back to the factory defaults.
1 Enter
erase running config
to reset the current running configuration.
2
Enter
write memory
to save the changes to the current configuration file.
The following example resets both configuration files to the factory default settings.
sysname# reload config 2
<index> =
Specifies which OMC configuration file to overwrite (1 or 2).
<ip> =
The IP address of a TFTP server from which you want to get the
backup configuration file.
<remote-file> =
Specifies the name of the configuration file.
sysname# copy tftp config 1 172.16.19.96 test.cfg
Restoring
. (683)Bytes Done!
sysname#
sysname# erase running-config
sysname# write memory