ZyXEL Communications OMC-2301, User Manual

Page: 177 / 224

Chapter 20 Command Examples
OMC-2301 User’s Guide
177
20.2.3 show epon-counter onu
Syntax:
show epon-counter onu <port-number> <llid>
This command displays the port counters obtained from the ONU.
The following example displays the port statistics of LLID 1 on PON port 801.
20.2.4 show hardware-monitor
Syntax:
system hardware-monitor <C|F>
This command displays the device temperature and voltage readings and fan speeds. You can
choose to display the temperature in Celsius (
C
) or Fahrenheit (
F
).
sysname# show epon-counter onu 801 1
Report Frames:
Tx OK = 0
Rx OK = 0
Gate Frames:
Tx OK = 0
Rx OK = 0
Unsupported Frames:
Rx OK = 0
PON Octets:
Tx OK = 0
Rx OK = 0
PON Frames:
Total Tx Dropped = 0
Rx FCS Error = 0
Rx Multicast = 0
Tx Multicast = 0
Rx Broadcast = 0
Tx Broadcast = 0
Q0 Tx Frames = 0
Q1 Tx Frames = 0
Q2 Tx Frames = 0
Q3 Tx Frames = 0
Sys Frames:
Tx OK = 0
Total Tx Dropped = 0
Rx OK = 0
Rx Err = 0
Rx Oversized = 0
Sys Octets:
Tx OK = 0
Rx OK = 0
Rx Err = 0
sysname#