ZyXEL Communications OMC-2301, User Manual

Page: 124 / 224

Chapter 14 Maintenance
OMC-2301 User’s Guide
124
2 Click OK . This takes up to two minutes. If you want to access the OMC web
configurator again, you may need to change the IP address of your computer to be in the
same subnet as that of the default management IP address (192.168.0.1).
14.3 Reboot System
Reboot System allows you to restart the OMC without physically turning the power off.
Follow the steps below to reboot the OMC.
1
In the Maintenance screen, click the Click Here button next to Reboot System to
display the next screen.
Figure 60 Reboot System: Confirmation
2 Click OK . This takes up to two minutes. This does not affect the OMC’s configuration.
14.4 Remote ONU Firmware Upgrade
You can perform remote firmware upgrade on the ONU(s) through the OMC.
"
The ONU firmware is bundled with the OMC firmware. Thus you don’t need to
download the ONU firmware separately. You must perform remote firmware
upgrade to the ONUs every time you upgrade the firmware on the OMC.
Follow the steps below to perform remote firmware upgrade on an ONU connected to the
OMC.
1 Click Management > Maintenance to access the Remote Firmware Upgrade screen.
Figure 61 Maintenance: Remote Firmware Upgrade