ZyXEL Communications OLT2406, User Manual

Page: 509 / 766

OLT2406 User’s Guide
509
71.2.1 Show QoS Commands
Use these commands to display different types of QoS profile settings.
qos ingprof help
Displays more information about the QoS ingress
profile. C 13
qos pbitprof < pbitprofName >
[p0to< value >],...]
Sets the QoS priority bit translation profile.
pbitprofName
: The QoS priority bit translation
profile name
p0to< value >
: Sets the priority bit translation
(0~7)
C 13
qos pbitprof help
Displays more information about the QoS priority
bit profile. C 13
qos wred
Enables Weighted Random Early Detection
(WRED) on the QoS. Use WRED to help avoid
traffic congestion. See
Chapter 100 on page
697 for more information on WRED.
C 13
interface port-channel < aid >
Enters config-interface mode for the specified
port(s).
aid
:
<ge|msc|pon>-< slot >-< port >
C 13
hybrid-spq lowest-queue
<q0|q1|...|q7>
Enables SPQ starting with the specified queue
and subsequent higher queues on the ports. C 13
qos priority <0-7>
Sets the specified interface’s QoS priority. C 13
exit
Leaves the interface configuration sub-
command mode. C 13
Table 256 QoS Commands (continued)
COMMAND DESCRIPTION M P
Table 257 Show QoS Commands
COMMAND DESCRIPTION M P
sh qos Bwprof
Displays the QoS bandwidth profile settings. E 13
sh qos cacprof
Displays the QoS Call Admission Control (CAC)
profile settings. CAC is used to prevent
oversubscription of a VoIP network. E 13
sh qos ds-meter
Displays the QoS downstream meter settings. E 3
sh qos ingprof
Displays the QoS ingress profile settings. E 13
sh qos pbitprof
Displays the QoS priority bit profile settings. E 13
sh qos wred
Displays the QoS Weighted Random Early
Detection (WRED) settings. Use WRED to help
avoid traffic congestion. See
Chapter 100 on
page 697 for more information on WRED.
E 3