ZyXEL Communications OLT2406, User Manual

Page: 502 / 766

Chapter 69 Port Authentication
OLT2406 User’s Guide
502
69.6 RADIUS Commands
Use these commands to configure external RADIUS (Remote Authentication Dial-In User Service) servers.
Table 254 RADIUS Server Commands
COMMAND DESCRIPTION M P
show radius-server
Displays RADIUS server settings. E 3
radius-server host < index > < ip >
[auth-port < socket-number >] [key
< key-string >]
Specifies the IP address of the RADIUS
authentication server. Optionally, sets the UDP
port number and shared secret.
index
: 1 or 2.
key-string
: 1-32 alphanumeric characters.
C 14
radius-server mode <index-
priority|round-robin>
Specifies how the OLT decides which RADIUS
server to select if you configure multiple servers.
index-priority
: The OLT tries to authenticate
with the first configured RADIUS server. If the
RADIUS server does not respond, then the OLT
tries to authenticate with the second RADIUS
server.
round-robin
: The OLT alternates between
RADIUS servers that it sends authentication
requests to.
C 14
radius-server timeout <1-1000>
Specifies the amount of time (in seconds) that
the OLT waits for an authentication request
response from the RADIUS server.
In
index-priority
mode, the timeout is
divided by the number of servers you configure.
For example, if you configure two servers and
the timeout is 30 seconds, then the OLT waits 15
seconds for a response from each server.
C 14
no radius-server < index >
Resets the specified RADIUS server to its default
values. C 14
show radius-accounting
Displays the RADIUS accounting settings. E 3
radius-accounting host < index >
< ip >
Specifies the IP address of a RADIUS accounting
host.
index
: 1 or 2.
C 13
radius-accounting host < index >
< ip > [acct-port < socket-number >]
[key < key-string >]
Set s the RADIUS accounting host’s optional
settings.
index
:
1 or 2.
acct-port < socket-number >, key
< key-string >
: Optional commands
C 13
radius-accounting timeout <1-1000>
Sets the RADIUS accounting server’s timeout
setting. C 13
no radius-accounting < index >
Removes the specific index of the RADIUS
accounting server.
index
: 1 or 2.
C 13