ZyXEL Communications OLT-1308, User Manual, Page: 196 / 314

Chapter 29 Maintenance
OLT-1308 Series User’s Guide
196
2 Select the PON port(s) you want to reset in the list box. You can select multiple entries
by holding down the [SHIFT] or [CTRL] key.
3 Click Reset to reset the selected port(s).
29.6 Remote Device Reset
Use the Remote Device Reset screen to reset the ONU connections. The OLT resets the link
to the remote ONUs.
1
Access the Remote Device Reset screen from the Maintenance screen.
Figure 94 Maintenance: Remote Device Reset
2 Select a port and click Get LLID to display the associated LLID.
3
Select the LLID(s) you want to reset in the list box. You can select multiple entries by
holding down the [SHIFT] or [CTRL] key.
4
Click Reset to reset the selected LLID(s).
"
Resetting the ONUs does NOT restart the OLT.
29.7 OLT Firmware Upgrade
Make sure you have downloaded (and unzipped) the correct model firmware and version to
your computer before uploading to the device.
"
Be sure to upload the correct model firmware as uploading the wrong model
firmware may damage your device.
From the Maintenance screen, display the Firmware Upgrade screen as shown next.