manualshive.com logo in svg

ZyXEL Communications OLT-1308, User Manual, Page: 193 / 314

Share
Download
ZyXEL Communications OLT-1308 User Manual Download Page 193

OLT-1308 Series User’s Guide

193

C

H A P T E R

 

 29 

Maintenance

This chapter explains how to configure the maintenance screens that let you maintain the 
firmware and configuration files.

29.1  The Main Maintenance Screen 

Use the 

Maintenance

 screens to perform device firmware and configuration file maintenance 

as well as rebooting the system. You can also perform remote ONU firmware upgrade and 
reset the ONU or the fiber connections. 
Click 

Management

 >

 Maintenance

 in the navigation panel to open the following screen.

Figure 87   

 Maintenance 

29.2  Load Factory Defaults

Follow the steps below to reset the OLT back to the factory defaults. 

1

From the 

Maintenance 

screen, click the 

Click Here 

button next to 

Load Factory 

Defaults

 to clear all OLT configuration information you configured and return to the 

factory defaults. The following message appears. 

Figure 88   

Load Factory Default: Conformation 

2

 Click 

OK

 to display the screen shown next.

Summary of Contents for OLT-1308



























































































































































































































































































































Reviews:

No comments