ZyXEL Communications NXC-8160, User Manual

Page: 29 / 205

Chapter 2 Introducing the Web Configurator
NXC-8160 User’s Guide
29
2.4.3 Status Screen
This screen displays general status information about the NXC-8160.
Figure 6 Web Configurator Status Screen
The following table describes the labels in this screen.
Table 3 Web Configurator Status Screen
LABEL DESCRIPTION
Refresh Interval Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not update
the screen statistics.
Refresh Now Click this button to update the status screen statistics immediately.
System Information
Date This field displays your NXC-8160’s present date and time.
Up Time This field displays how long the NXC-8160 has been running since it last started
up. The NXC-8160 starts up when you turn it on, when you restart it or reset to the
defaults (using the
Maintenance screen).
Firmware Version This field displays the current firmware version of the NXC-8160.
LAN
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
Default Gateway This shows the IP address of the gateway in your network.
Syslog Server This shows the IP address of the server to which the NXC-8160 sends system
logs.
Access Points (1-8)
Active Access
Points This shows the number(s) of the WLAN port(s) to which an active access point is
connected.
Power-On Access
Points This shows the number(s) of the WLAN port(s) which is enabled to supply power
to an access point.