ZyXEL Communications NWD217N, User Manual

Page: 61 / 148

Chapter 4 ZyXEL Utility - Windows
NWD271N User’s Guide
61
4.5.1 Adding a New Profile
Follow the steps below to add a new profile.
1
Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Figure 35 Profile: Add a New Profile
The following table describes the labels in this screen.
Table 14 Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select , or
enter the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter
Any to have the NWD271N associate to any AP or
roam between any infrastructure wireless networks.
Network Type Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer
computer.
Next Click Next to go to the next screen.
Exit Click Exit to go back to the previous screen without saving.
Scan Info This table displays the information of the available wireless networks within the
transmission range.
,
,
or
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
SSID This field displays the SSID (Service Set IDentifier) of each AP or peer device.