ZyXEL Communications NWD-211AN -, User Manual

Page: 55 / 148

Chapter 4 ZyXEL Utility - Windows
NWD271N User’s Guide
55
4.4.1.2 WPA-PSK/WPA2-PSK
Configure WPA-PSK/WPA2-PSK security in this screen.
"
The procedure to configure WPA or WPA2 is different in Windows Vista. See
Section 4.7 on page 67 for information on setting up your NWD271N to use
WPA or WPA2 in Vista.
Figure 30 Security Setting: WPA-PSK/WPA2-PSK
Key x (where x is
a number
between 1 and 4)
Select this option if you want to manually enter the WEP keys. Enter the WEP key
in the field provided.
If you select
64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey12345678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Summary screen. Refer
to Section 4.4.2 on page 59 .
Exit Click Exit to return to the Site Survey screen without saving.
Table 8 Security Setting: WEP (continued)
LABEL DESCRIPTION