Chapter 13 Log and Report
NWA5000 / WAC6500 Series User’s Guide
156
13.3.3 Edit Remote Server
This screen controls the settings for each log in the remote server (syslog). Select a remote server
entry in the
Log Setting
screen and click the
Edit
icon.
E-mail Server 2
Use the
E-Mail Server 2
drop-down list to change the settings for e-mailing logs to
e-mail server 2 for all log categories.
Using the
System Log
drop-down list to disable all logs overrides your e-mail server
2 settings.
enable normal logs
(green check mark) - e-mail log messages for all categories to
e-mail server 2.
enable alert logs
(red exclamation point) - e-mail alerts for all categories to e-mail
server 2.
#
This field is a sequential value, and it is not associated with a specific address.
Log Category
This field displays each category of messages. It is the same value used in the
Display
and
Category
fields in the
View Log
tab. The
Default
category includes
debugging messages generated by open source software.
System log
Select which events you want to log by
Log Category
. There are three choices:
disable all logs
(red X) - do not log any information from this category
enable normal logs
(green checkmark) - create log messages and alerts from this
category
enable normal logs and debug logs
(yellow check mark) - create log messages,
alerts, and debugging information from this category; the NWA/WAC does not e-mail
debugging information, however, even if this setting is selected.
E-mail Server 1
Select whether each category of events should be included in the log messages when
it is e-mailed (green check mark) and/or in alerts (red exclamation point) for the e-
mail settings specified in
E-Mail Server 1
. The NWA/WAC does not e-mail
debugging information, even if it is recorded in the
System log
.
E-mail Server 2
Select whether each category of events should be included in log messages when it
is e-mailed (green check mark) and/or in alerts (red exclamation point) for the e-
mail settings specified in
E-Mail Server 2
. The NWA/WAC does not e-mail
debugging information, even if it is recorded in the
System log
.
Log Consolidation
Active
Select this to activate log consolidation. Log consolidation aggregates multiple log
messages that arrive within the specified
Log Consolidation Interval
. In the
View
Log
tab, the text “[count=
x
]”, where
x
is the number of original log messages, is
appended at the end of the
Message
field, when multiple log messages were
aggregated.
Log Consolidation
Interval
Type how often, in seconds, to consolidate log information. If the same log message
appears multiple times, it is aggregated into one log message with the text
“[count=
x
]”, where
x
is the number of original log messages, appended at the end of
the
Message
field.
OK
Click this to save your changes and return to the previous screen.
Cancel
Click this to return to the previous screen without saving your changes.
Table 75
Configuration > Log & Report > Log Setting > Edit System Log Setting (continued)
LABEL
DESCRIPTION
Summary of Contents for NWA5121-N
Page 10: ...10 PART I User s Guide...
Page 38: ...38 PART II Technical Reference...
