ZyXEL Communications NWA1300-NJ -, User Manual

Page: 49 / 164

Chapter 6 Administration
NWA1300-NJ User’s Guide
49
To change your NWA1300-NJ’s FTP settings, click ADMINISTRATION > FTP. The
screen appears as shown. Use this screen to specify from which IP address the
access can come.
Figure 12 ADMINISTRATION > FTP
The following table describes the labels in this screen.
6.4 FIRMWARE
There are two ways to upgrade firmware to the NWA1300-NJ: manually or
scheduled.
To manually upgrade the firmware, you have to download the latest firmware first
from
www.zyxel.com and then upload it to the NWA1300-NJ. You can upload it to
the NWA1300-NJ using the Web Configurator or using a TFTP server.
With scheduled firmware upgrade, you need to set up a TFTP server where the
NWA1300-NJ can automatically download the latest firmware at the specified
time.
Table 10 ADMINISTRATION > FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed,
however you must use the same port number in order to use FTP to
access the NWA1300-NJ.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate
with the NWA1300-NJ using this service.
Select All to allow any computer to access the NWA1300-NJ using FTP.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA1300-NJ using FTP.
Reset Click Reset to reload the default configuration for this screen.
Apply Click Apply to save your changes back to the NWA1300-NJ.