Chapter 2 The Web Configurator
NWA1123-ACv2 User’s Guide
23
The fields vary with the type of object. The following table describes labels that can appear in this
screen.
CLI Messages
Click
CLI
to look at the CLI commands sent by the Web Configurator. These commands appear in a
popup window, such as the following.
Figure 11
CLI Messages
Click
Clear
to remove the currently displayed information.
Note: See the Command Reference Guide for information about the commands.
2.3.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure NWA features. Click the
arrow in the middle of the right edge of the navigation panel to hide the navigation panel menus or
drag it to resize them. The following sections introduce the NWA’s navigation panel menus and their
screens.
Table 5
Object References
LABEL
DESCRIPTION
Object Name
This identifies the object for which the configuration settings that use it are displayed. Click
the object’s name to display the object’s configuration screen in the main window.
#
This field is a sequential value, and it is not associated with any entry.
Service
This is the type of setting that references the selected object. Click a service’s name to
display the service’s configuration screen in the main window.
Priority
If it is applicable, this field lists the referencing configuration item’s position in its list,
otherwise
N/A
displays.
Name
This field identifies the configuration item that references the object.
Description
If the referencing configuration item has a description configured, it displays here.
Refresh
Click this to update the information in this screen.
Cancel
Click
Cancel
to close the screen.
Summary of Contents for NWA1123-ACv2
Page 10: ...10 PART I User s Guide...
Page 29: ...29 PART II Technical Reference...
Page 55: ...Chapter 6 Wireless NWA1123 ACv2 User s Guide 55 Figure 31 Configuration Wireless AP Management...
Page 210: ...Appendix D Legal Information NWA1123 ACv2 User s Guide 210 Environmental Product Declaration...
