manualshive.com logo in svg

ZyXEL Communications NWA1123-ACv2, User Manual

Share
Download
ZyXEL Communications NWA1123-ACv2 User Manual Download Page 175

 Chapter 19 Troubleshooting

NWA1123-ACv2 User’s Guide

175

In the 

Monitor > Wireless > AP Information > Radio List

 screen, there is no load 

balancing indicator associated with any APs assigned to the load balancing task.

• Check to be sure that the AP profile which contains the load balancing settings is correctly 

assigned to the APs in question.

• The load balancing task may have been terminated because further load balancing on the APs in 

question is no longer required.

19.6  Resetting the NWA

If you cannot access the NWA by any method, try restarting it by turning the power off and then on 
again. If you still cannot access the NWA by any method or you forget the administrator 
password(s), you can reset the NWA to its factory-default settings. Any configuration files or shell 
scripts that you saved on the NWA should still be available afterwards.

Use the following procedure to reset the NWA to its factory-default settings. This overwrites the 
settings in the startup-config.conf file with the settings in the system-default.conf file. 

Note: This procedure removes the current configuration. 

1

Make sure the Power LED is on and not blinking.

2

Press the 

RESET

 button and hold it until the Power LED begins to blink. (This usually takes about 

ten seconds.)

3

Release the 

RESET

 button, and wait for the NWA to restart.

You should be able to access the NWA using the default settings.

19.7  Getting More Troubleshooting Help

Search for support information for your model at www.zyxel.com for more troubleshooting 
suggestions.

Summary of Contents for NWA1123-ACv2



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands