![ZyXEL Communications NWA1123-ACv2 User Manual Download Page 16](http://html1.mh-extra.com/html/zyxel-communications/nwa1123-acv2/nwa1123-acv2_user-manual_945928016.webp)
Chapter 1 Introduction
NWA1123-ACv2 User’s Guide
16
1.5 LED
The LED of your NWA can be controlled by using the Suppression feature such that the LED stays lit
(ON) or OFF after the device is ready.
The following are the LED descriptions for your NWA.
Figure 5
NWA LED
The following are the LED descriptions for your NWA.
Table 1
NWA LED
COLOR
STATUS
DESCRIPTION
Amber
Slow Blinking (On for
1s, Off for 1s)
The NWA is booting up.
Green
Off
Amber
Off
The NWA is ready for use.
Green
Off
Amber
Off
The NWA’s wireless interface is activated.
Green
On
Amber
Off
The NWA is receiving/sending wireless traffic.
Green
Blink
Amber
On
The NWA failed to boot up or is experience system failure.
Green
Off
Amber
Fast Blinking (On for
50ms, Off for 50ms)
The NWA is undergoing firmware upgrade.
Green
Off
Summary of Contents for NWA1123-ACv2
Page 10: ...10 PART I User s Guide...
Page 29: ...29 PART II Technical Reference...
Page 55: ...Chapter 6 Wireless NWA1123 ACv2 User s Guide 55 Figure 31 Configuration Wireless AP Management...
Page 210: ...Appendix D Legal Information NWA1123 ACv2 User s Guide 210 Environmental Product Declaration...