Chapter 9 Network
NWA1000 Series User’s Guide
77
9.4 NCC Discovery
You can manage the NWA1000 Series through the Zyxel Nebula Control Center (NCC). Use this screen to
configure the proxy server settings if the NWA1000 Series is behind a proxy server.
To access this screen, click
Configuration
>
Network
>
NCC Discovery
.
Figure 46
Configuration > Network > NCC Discovery
Each field is described in the following table.
Apply
Click
Apply
to save your changes back to the NWA1000 Series.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 31 Configuration > Network > VLAN (continued)
LABEL
DESCRIPTION
Table 32 Configuration > Network > NCC Discovery
LABEL
DESCRIPTION
Enable
Select this option to turn on NCC discovery on the NWA1000 Series. The NWA1000 Series
will try to discover the NCC and go into cloud mode when it is connected to the
Internet and has been registered in the NCC.
If NCC discovery is disabled, the NWA1000 Series will not discover the NCC and remain
in standalone mode.
Use Proxy to Access NCC If the NWA1000 Series is behind a proxy server, you need to select this option and
configure the proxy server settings so that the NWA1000 Series can access the NCC
through the proxy server.
Proxy Server
Enter the IP address of the proxy server.
Proxy Port
Enter the service port number used by the proxy server.
Authentication
Select this option if the proxy server requires authentication before it grants access to
the NCC.
User Name
Enter your proxy user name.
Password
Enter your proxy password.
Apply
Click
Apply
to save your changes back to the NWA1000 Series.
Reset
Click
Reset
to return the screen to its last-saved settings.