ZyXEL Communications NWA1000 Series, User Manual, Page: 69 / 263

Chapter 8 Monitor
NWA1000 Series User’s Guide
69
8.8 View Log
Log messages are stored in two separate logs, one for regular log messages and one for debugging
messages. In the regular log, you can look at all the log messages by selecting
All Logs , or you can
select a specific category of log messages (for example, user). You can also look at the debugging log
by selecting
Debug Log . All debugging messages have the same priority.
To access this screen, click Monitor > Log . The log is displayed in the following screen.
Note: When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing log
message first.
Events that generate an alert (as well as a log message) display in red. Regular logs display in black.
Click a column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell
again to reverse the sort order.
Mark as Rogue
AP Click this button to mark the selected AP as a rogue AP. For more on managing rogue APs, see
the
Configuration > Wireless > Rogue AP screen ( Section 10.3 on page 82 ).
Mark as Friendly
AP Click this button to mark the selected AP as a friendly AP. For more on managing friendly APs,
see the
Configuration > Wireless > Rogue AP screen ( Section 10.3 on page 82 ).
# This is the detected device’s index number in this list.
Role This indicates the detected device’s role (such as friendly or rogue).
Classified by This indicates the detected device’s classification rule.
MAC Address This indicates the detected device’s MAC address.
SSID Name This indicates the detected device’s SSID.
Channel ID This indicates the detected device’s channel ID.
802.11 Mode This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
Security This indicates the encryption method (if any) used by the detected device.
Description This displays the detected device’s description. For more on managing friendly and rogue APs,
see the
Configuration > Wireless > Rogue AP screen ( Section 10.3 on page 82 ).
Last Seen This indicates the last time the device was detected by the NWA1000 Series.
Refresh Click this to refresh the items displayed on this page.
Table 28 Monitor > Wireless > Detected Device (continued)
LABEL DESCRIPTION