manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 100 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 100

Chapter 12 AP Profile

NWA1000 Series User’s Guide

100

12.2.1  Add/Edit Radio Profile

This screen allows you to create a new radio profile or edit an existing one. To access this screen, click 
the 

Add

 button or select a radio profile from the list and click the 

Edit

 button. 

Inactivate

To turn off an entry, select it and click 

Inactivate

.

Object 
Reference

Click this to view which other objects are linked to the selected radio profile.

#

This field is a sequential value, and it is not associated with a specific user.

Status

This field shows whether or not the entry is activated.

A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.

Profile Name

This field indicates the name assigned to the radio profile.

Frequency Band

This field indicates the frequency band which this radio profile is configured to use.

Apply

Click 

Apply

 to save your changes back to the NWA1000 Series.

Reset

Click 

Reset

 to return the screen to its last-saved settings.

Table 43   Configuration > Object > AP Profile > Radio (continued)

LABEL

DESCRIPTION

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments