manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 65

 Chapter 4 Web Configurator

NWA/WAC/WAX Series User’s Guide

65

Figure 33   

The Web Configurator’s Main Screen for Cloud Mode

The Web Configurator’s main screen is divided into these parts:

•

A

 - Title Bar

•

B

 - Navigation Panel

•

C

 - Main Window

4.3.1  Title Bar

The title bar provides some useful links that always appear over the screens below, regardless of how 
deep into the Web Configurator you navigate. If your Zyxel Device is in NCC mode, not all icons will be 
available in the Title Bar.

Figure 34   

Title Bar

The icons provide the following functions.

Site Map

Click 

Site MAP

 to see an overview of links to the Web Configurator screens. Click a screen’s link to go to 

that screen.

  A

 B

C

Table 20   Title Bar: Web Configurator Icons

LABEL

DESCRIPTION

Wizard

Click this to open the wizard. See 

Chapter 7 on page 82

 for more information.

Help

Click this to open the help page for the current screen.

Forum

Click this to go to Zyxel Biz User Forum, where you can get the latest Zyxel Device information 
and have conversations with other people by posting your messages.

Site Map

Click this to see an overview of links to the Web Configurator screens.

CLI

Click this to open a popup window that displays the CLI commands sent by the Web 
Configurator.

Logout

Click this to log out of the Web Configurator.

nebula

Click this to open the NCC web site login page in a new tab or window.

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands