manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 51

 Chapter 3 Hardware

NWA/WAC/WAX Series User’s Guide

51

3.4  Zyxel Device Models With Multiple LEDs

The LEDs of some Zyxel Device models can be controlled by using the suppression feature such that the 
LEDs stay lit (ON) or OFF after the Zyxel Device is ready. Some Zyxel Device models also has Locator LED 
which allows you to see the actual location of the Zyxel Device among several devices in the network. 
See 

Section 1.2 on page 14

 to check which models support these features. Refer to 

Chapter 21 on page 

246

 for the LED 

Suppression

 and 

Locator

 menus in standalone mode.

The following models have multiple LEDs: NWA1123-AC PRO, NWA1302-AC, WAC6103D-I, WAC5302D-S, 
WAC6502D-E, WAC6502D-S, WAC6503D-S.

3.4.1  NWA1123-AC PRO

The following are the LED descriptions for your NWA1123-AC PRO. 

Figure 23   

NWA1123-AC PRO LEDs  

 

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands