Chapter 12 User
NWA/WAC/WAX Series User’s Guide
141
Figure 91
Configuration > Object > User > Setting
The following table describes the labels in this screen.
Table 54 Configuration > Object > User > Setting
LABEL
DESCRIPTION
User Default Setting
Default Authentication
Timeout Settings
These authentication timeout settings are used by default when you create a new
user account. They also control the settings for any existing user accounts that are
set to use the default settings. You can still manually configure any user account’s
authentication timeout settings.
Edit
Double-click an entry or select it and click
Edit
to open a screen where you can
modify the entry’s settings.
#
This field is a sequential value, and it is not associated with a specific entry.
User Type
These are the kinds of user account the Zyxel Device supports.
•
admin
- this user can look at and change the configuration of the Zyxel Device
•
limited-admin
- this user can look at the configuration of the Zyxel Device but not
to change it
•
user
- this is used for embedded RADIUS server and SNMPv3 user access
Lease Time
This is the default lease time in minutes for each type of user account. It defines the
number of minutes the user has to renew the current session before the user is
logged out.
Admin users renew the session every time the main screen refreshes in the Web
Configurator.
