ZyXEL Communications NWA-3550, User Manual

Page: 97 / 408

Chapter 6 AP Controller Mode
NWA-3500/NWA-3550 User’s Guide
97
6.4 AP Lists Screen
Use this screen to view and add managed APs. By default, the controller NWA is
always included in this table. Although you cannot remove it, you can edit its
settings.
802.11b/g This field displays the number of wireless clients associated with
APs managed by the NWA (including the NWA itself) using
802.11b/g radio mode.
Redundancy The table below shows when redundancy is enabled (see Section
6.6 on page 102 ) and the NWA acts as the primary AP controller.
Redundancy Device This field displays the IP address of the secondary AP controller.
Last Synchronization
Result This field displays whether the last synchronization with the
secondary AP controller succeeded (
SUCCESS ) or failed
( DISABLED ).
Last Synchronization
Time This field displays the last date and time when the NWA
synchronized settings with the secondary AP controller.
Alive Status This field displays either NO RESPONSE (the secondary AP
controller is down) or ALIVE (the secondary AP controller is
active).
System Status
AP List
Click this to see a list of the APs managed by the NWA.
AP Statistics Click this to see packet statistics related to each of the APs
managed by the NWA.
Association List Click this to see information about each of the wireless clients
connected to APs managed by the NWA. This does not include
the NWA itself.
SSID Information Click this to see details of the security settings used by each
SSID, and the number of wireless clients associated with each
SSID.
Table 11 Status Screen
LABEL DESCRIPTION