ZyXEL Communications NWA-3550, User Manual

Page: 70 / 408

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
70
2
Next, click the SSID tab. Check that each configured SSID profile uses the correct
Security , Layer-2 Isolation and MAC Filter profiles, as shown in the following
figure.
Figure 43 Tutorial: SSID Tab Correct Settings
If the settings are not as shown, follow the steps in the relevant section of this
tutorial again.
3.5.6.2 Testing the Configuration
Before you allow employees to use the network, you need to thoroughly test
whether the setup behaves as it should. Take the following steps to do this.
1
Test the SERVER_1 network.
• Using Alice’s computer and wireless client, and the correct security settings,
do the following.
Attempt to access Server
1 . You should be able to do so.
Attempt to access the Internet. You should be able to do so.
Attempt to access Server
2 . You should be unable to do so. If you can do so,
layer-2 isolation is misconfigured.
• Using Alice’s computer and wireless client, and incorrect security settings,
attempt to associate with the SERVER_1 network. You should be unable to
do so. If you can do so, security is misconfigured.
• Using another computer and wireless client, but with the correct security
settings, attempt to associate with the SERVER_1 network. You should be
unable to do so. If you can do so, MAC filtering is misconfigured.
2
Test the SERVER_2 network.
• Using Bob’s computer and wireless client, and the correct security settings, do
the following.
Attempt to access Server
2 . You should be able to do so.