ZyXEL Communications NWA-3550, User Manual

Page: 171 / 408

Chapter 11 RADIUS Screen
NWA-3500/NWA-3550 User’s Guide
171
11.2 The RADIUS Screen
Use this screen to set up your NWA’s RADIUS server settings. Click Wireless >
RADIUS . The screen appears as shown.
Figure 96 RADIUS
The following table describes the labels in this screen.
Table 45 RADIUS
LABEL DESCRIPTION
Index Select the RADIUS profile you want to configure from the drop-down
list box.
Profile Name Type a name for the RADIUS profile associated with the Index
number above.
Primary Configure the fields below to set up user authentication and
accounting.
Backup If the NWA cannot communicate with the Primary accounting
server, you can have the NWA use a Backup RADIUS server. Make
sure the Active check boxes are selected if you want to use backup
servers.
The NWA will attempt to communicate three times before using the
Backup servers. Requests can be issued from the client interface to
use the backup server. The length of time for each authentication is
decided by the wireless client or based on the configuration of the
ReAuthentication Timer field in the Security screen.
RADIUS Option