ZyXEL Communications NWA-3160 User Manual Download Page 138

Page: 138 / 386

Chapter 11 User

NWA3000-N Series User’s Guide

138

Note: The default

admin

account is always authenticated locally, regardless of the

authentication method setting.

11.2 User Summary

The

User

screen provides a summary of all user accounts. To access this screen

click

Configuration > Object > User

Figure 62

Configuration > Object > User

The following table describes the labels in this screen.

limited-admin

Look at NWA3000-N series AP
configuration (web, CLI)

Perform basic diagnostics (CLI)

WWW, TELNET, SSH, Console

Access Users
user

Used for the embedded RADIUS server
and SNMPv3 user access

Browse user-mode commands (CLI)

Table 47

Types of User Accounts (continued)

TYPE

ABILITIES

LOGIN METHOD(S)

Table 48

Configuration > Object > User

LABEL

DESCRIPTION

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click

Edit

to open a screen where

you can modify the entry’s settings.

Remove

To remove an entry, select it and click

Remove

. The NWA3000-N series

AP confirms you want to remove it before doing so.

Object
References

Select an entry and click

Object Reference

s to open a screen that

shows which settings use the entry.

This field is a sequential value, and it is not associated with a specific
user.

Summary of Contents for NWA-3160



































































































































































































































































































































































































Search results

Summary of Contents for NWA-3160

Reviews:

Brands by name

Popular brands

ZyXEL Communications NWA-3160, User Manual

Search results

Summary of Contents for NWA-3160

Reviews:

Brands by name

Popular brands