manualshive.com logo in svg

ZyXEL Communications NWA-1100, User Manual, Page: 130 / 225

Share
Download
ZyXEL Communications NWA-1100 User Manual Download Page 130

Chapter 14 Maintenance

ZyXEL NWA-1100 User’s Guide

130

If the upload was not successful, the following screen will appear. Click 

Return

 to 

go back to the 

Configuration

 screen. 

Figure 70   

Configuration Upload Error

14.7.3  Back to Factory Defaults

Pressing the 

Reset

 button in this section clears all user-entered configuration 

information and returns the ZyXEL Device to its factory defaults as shown on the 
screen. The following warning screen will appear. 

Figure 71   

Reset Warning Message

You can also press the 

RESET

 button to reset your ZyXEL Device to its factory 

default settings. Refer to 

Section 2.2 on page 30

 

for more information.

14.8  Restart Screen

Use this screen to reboot the ZyXEL Device without turning the power off. 

Click 

Maintenance

 > 

Restart

. The following screen displays.

Figure 72   

Restart Screen

Click 

Restart

 to have the ZyXEL Device reboot. This does not affect the ZyXEL 

Device's configuration. 

Summary of Contents for NWA-1100


































































































































































































































Reviews:

No comments