ZyXEL Communications NWA-1100 User Manual Download Page 120

Page: 120 / 225

Chapter 13 Log Screens

ZyXEL NWA-1100 User’s Guide

120

13.6 Technical Reference

This section provides some technical background information about the topics
covered in this chapter.

13.6.1 Example Log Messages

The following tables provide descriptions of some example log messages that the
ZyXEL Device generates.

Table 38

System Maintenance Logs

LOG MESSAGE

DESCRIPTION

WLAN: Radar interference
2412 MHz.

Wireless driver receives radar pulse at center frequency
2412 MHz.

WLAN: CW interference
2412 MHz.

Wireless driver receives noise interference pulse at center
frequency 2412 MHz.

WLAN service started.

Wireless port ath0 started.

WLAN service stopped.

Wireless port ath0 stopped.

AP MIC failed.

Wireless driver MIC checked failed.

AP MIC attacked.

Wireless driver received MIC attack packet.

Station authenticated.

AP received the request for authentication from station
and authenticated the station successfully.

Station authentication
failed.

AP received the request for authentication from station but
the authentication failed.

Station deauthenticated.

AP receive the deauthenticated packet from the STA which
connected with AP.

Station associated.

AP receive the association request packet from the STA
which connected with AP.

Station disassociated.

AP receive the disassociation request packet from the STA,
which connected with AP.

Station refused.

A STA wanted to connect to the AP but was refused.

Remote Bridge AP
configured.

Remote AP MAC address was configured.

Remote Bridge AP
deleted.

Remote AP MAC address was deleted.

CLI: Authorized user
from IP.

A device succesfully logs into the AP via Telnet (the
device’s IP address shows in the log message.)

CLI: Unauthorized user
from IP.

A device fails to log into the AP via Telnet (the device’s IP
address shows in the log message.)

WEB: Authorized user
from IP.

A device successfully logs into the AP via WWW (the
device’s IP address shows in the log message.)

WEB: Unauthorized user
from IP.

A device fails to log into the AP via WWW (the device’s IP
address shows in the log message.)

Summary of Contents for NWA-1100


































































































































































































































Search results

Summary of Contents for NWA-1100

Reviews:

Related manuals for NWA-1100

Brands by name

Popular brands

ZyXEL Communications NWA-1100, User Manual

Search results

Summary of Contents for NWA-1100

Reviews:

Related manuals for NWA-1100

Brands by name

Popular brands