ZyXEL Communications NWA-1100, User Manual

Page: 119 / 225

Chapter 13 Log Screens
ZyXEL NWA-1100 User’s Guide
119
Syslog Logging Syslog logging sends a log to an external syslog server used to
store logs.
Active Click Active to enable syslog logging.
Syslog IP
Address
Enter the IP address of the syslog server that will log the selected
categories of logs.
Syslog Port
Number
Enter the port number of the syslog server that will log the selected
categories of logs.
Send Log
Log Schedule This drop-down menu is used to configure the frequency of log
messages being sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day
when the E-mail should be sent. If the Weekly option is selected,
then also specify which day of the week the E-mail should be sent.
If the
When Log is Full option is selected, an alert is sent when the
log fills up. If you select None , no log messages are sent.
Day for Sending
Log
This field is only available when you select Weekly in the Log
Schedule field.
Use the drop down list box to select which day of the week to send
the logs.
Time for
Sending Log
Enter the time of the day in 24-hour format (for example 23:00
equals 11:00 pm) to send the logs.
Clear log after
sending mail
Select the check box to clear all logs after logs and alert messages
are sent via e-mail.
Email log now Select the categories of alerts for which you want the ZyXEL Device
to immediately send e-mail alerts.
Log
System
Maintenance
Click this to receive logs related to system maintenance.
System Errors Click this to receive logs related to system errors.
802.1x Click this to receive logs related to the 802.1x mode.
Wireless Click this to receive logs related to the wireless function.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to reconfigure all the fields in this screen.
Table 37 Log Settings
LABEL DESCRIPTION