ZyXEL Communications NSA series, User Manual

Page: 158 / 358

Chapter 7 Storage
Media Server User’s Guide
158
7.4.1 Scanning a Volume
Select a volume in the Storage > Volume screen ( Section 7.2 on page 152 ) and click Scan to
open the following screen. Use this screen to scan the volume for errors and select whether or not
to have the NSA automatically repair them.
Figure 61
Storage > Volume > Scan
The following table describes the labels in this screen.
7.5 Creating an External (USB) Volume
Click the Create a New External Volume button (or the Create a USB Volume button
depending on your model) in the Storage screen as shown in Figure 57 on page 153 to open the
following screen. Use this screen to create a new NSA external disk drive volume.
Table 25
Storage > Volume > Scan
LABEL DESCRIPTION
Auto File Repair Select this to have the NSA automatically attempt to repair any errored files it detects
during the scan. This may also result in the NSA finding some files and placing them in the
Lost and Found share.
The rest of the screen shows which users are currently connected to the NSA. They will be
disconnected if you perform the scan.
Type This shows whether it’s a Windows/CIFS, web (Web Configurator), or FTP connection to the
NSA.
Share Name This displays the shared folder name on the NSA that the user is connected to for CIFS
sessions and is blank for FTP and web sessions.
Username This displays the name of the user connected to the NSA if one is defined. ANONYMOUS
FTP displays if a username is not defined for the user’s connection.
IP Address This displays the IP address of the computer connected to the NSA.
Apply Click this to have the NSA scan the volume.
Cancel Click this to close this screen without scanning the volume.