ZyXEL Communications NSA series, User Manual

Page: 147 / 358

Chapter 6 System Setting
Media Server User’s Guide
147
6.6 The Server Name Screen
Click System Setting > Server Name to open the following screen. Use this screen to configure
your CIFS settings. In this screen you can set your server name and specify if your NSA is a part of
a workgroup.
Note: CIFS cannot be disabled on the NSA.
Figure 55
System Setting > Server Name
The following table describes the labels in these screens.
6.7 The Date/Time Screen
Use this screen to select a time zone and a time server from which your NSA can get the time and
date. This time is then used in NSA logs and alerts.
Table 20
System Setting > Server Name
LABEL DESCRIPTION
Server Name Enter a name to identify your NSA on the network in this field.
You can enter up to 15 alphanumeric characters with minus signs allowed but not as the
last character. The name must begin with an alphabet (a-z) and is NOT case sensitive.
Description Add text here to describe the NSA if the Server Name field is not enough. Use up to 61
characters. You can use all characters except the following: /\:|[]<>+;,?=*"~.
Workgroup Name Type your workgroup name in this field. A workgroup is a group of computers on a
network that can share files. These user accounts are maintained on the NSA.
You can enter up to 15 alphanumeric characters with minus signs allowed but not as the
last character. The name must begin with an alphabet (a-z) and is NOT case sensitive.
Prevent NSA From
Being Master
Browser Select this option if computers in your workgroup are named with non-English characters
(such as Chinese and Russian). When you perform a search in the workgroup, this option
allows you to locate computers named with non-English characters.
Apply Click this to save your changes.
Reset Click this to restore previously saved settings.