manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 53

 Chapter 3 EPON Manager

NetAtlas EPON Manager User’s Guide

53

3.8  Configuration Save

You must save the current device configuration in the EMS to the selected 
device(s) to make the changes take effect.

For most device configuration screens in the EMS clicking Apply will save the 
changes to the EMS database but not to the device itself. To save the changes to 
the device you must save the configuration to the device using Configuration 
Save.

Note: Do NOT turn off the device during the updating process, as it may corrupt the 

firmware and make your device unusable.

1

To save the current device configuration, select and right-click on the device icon 
in the Device List Panel. 

2

Click Configuration Save.

3

Choose a device from the list on the screen and click Add to add the device to the 
table on the right. You can select more than one device by pressing [CTRL] and 
selecting at the same time.

Figure 24   

Configuration Save 

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands