manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 37

 Chapter 2 Main Screen

NetAtlas EPON Manager User’s Guide

37

• Login account information
• Various EMS configuration settings

This menu item allows you to back up and restore logs and configuration files. You 
must be logged in using the root account to use some of these functions.

2.4.1  Backup and Restore

Use this screen to back up and restore the databases for the EMS. On your 
computer, each backup is stored as a set of text files in a specific folder. To open 
this screen, click Tools > Database Management > Backup/Restore.

Figure 12   

Tools > Database Management > Backup/Restore

The following table describes the labels in this screen.

Table 12   

Tools > Database Management > Backup/Restore

LABEL

DESCRIPTION

Directory

This field displays the current directory for backing up or restoring the 
database. If you are backing up, this is the directory in which the EMS 
backup files are created. If you are restoring, this is the directory in which 
the EMS backup files are located. Click Browse... to set this directory.

Backup

Click this to transfer the database files from the EMS to a computer.

Restore

Click this to transfer the database files from your computer to the EMS.

Apply

Click this to back up or restore the selected database files.

Close

Click this to close the screen.

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands