ZyXEL Communications NetAtlas, User Manual

Page: 297 / 340

Chapter 20 Advanced Configuration
NetAtlas EPON Manager User’s Guide
297
The following table describes the labels in this screen.
Table 150 Advanced Configuration > Authentication
LABEL DESCRIPTION
Authentication Setup Use this section to specify the methods used to authenticate
users accessing the OLT.
Privilege Enable These fields specify which database the OLT should use (first,
second and third) to authenticate access privilege level for
administrator accounts (users for OLT management).
Configure the access privilege of accounts via commands for
local authentication. The and RADIUS are external
servers. Before you specify the priority, make sure you have set
up the corresponding database correctly first.
You can specify up to three methods for the OLT to authenticate
the access privilege level of administrators. The OLT checks the
methods in the order you configure them (first Method 1, then
Method 2 and finally Method 3). You must configure the
settings in the Method 1 field. If you want the OLT to check
other sources for access privilege level specify them in Method 2
and Method 3 fields.
Select local to have the OLT check the access privilege
configured for local authentication.
Select radius or to have the OLT check the access
privilege via the external servers.
Login These fields specify which database the OLT should use (first,
second and third) to authenticate administrator accounts (users
for OLT management).
Configure the local user accounts in the Access Control >
Logins screen. The and RADIUS are external servers.
Before you specify the priority, make sure you have set up the
corresponding database correctly first.
You can specify up to three methods for the OLT to authenticate
administrator accounts. The OLT checks the methods in the order
you configure them (first Method 1, then Method 2 and finally
Method 3). You must configure the settings in the Method 1
field. If you want the OLT to check other sources for
administrator accounts, specify them in Method 2 and Method
3 fields.
Select local to have the OLT check the administrator accounts
configured in the Access Control > Logins screen.
Select radius to have the OLT check the administrator accounts
configured via your RADIUS server.
Select to have the OLT check the administrator
accounts configured via your server.
RADIUS Server