manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 142

Chapter 10 Maintenance

NetAtlas EPON Manager User’s Guide

142

The following table describes the labels in this screen.

10.8  Scheduled Firmware Upgrade

Use this screen to upload firmware to one or more devices at a scheduled time. 
Set the time and date of the upload and the location of the firmware you want to 
upload to each of them. Each schedule can upload firmware for multiple devices.

To open this screen, click Maintenance > Scheduled Firmware Upgrade.

Figure 95   

Maintenance > Scheduled Firmware Upgrade 

Table 67   

Maintenance > Scheduled Device Configuration Restore: Add devices

LABEL 

DESCRIPTION

Device Type

Select the model of the device you want to add to the schedule.

Device Name

Select one or more devices to which you want to restore the specified 
configuration file. Use the Shift key or Ctrl key to select more than one 
device.

Search 
Device...

Click the Search Device... button to find or locate a device (or node). 
See 

Section 3.9.3.1 on page 56

 for more details.

Add

Click Add to add any devices that you wish to create a scheduled device 
configuration restore for.

Remove

Click Remove to delete any selected devices from the device list.

Source File

Click Browse to locate the configuration file you wish to restore. You can 
also manually type in the address of the file.

OK

Click OK to save your changes and exit the screen.

Cancel

Click Cancel to exit without making any changes.

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands