manualshive.com logo in svg

ZyXEL Communications NetAtlas, User Manual

Share
Download
ZyXEL Communications NetAtlas User Manual Download Page 135

 Chapter 10 Maintenance

NetAtlas EPON Manager User’s Guide

135

10.5  Device Configuration Backup and Restore

Use this screen to backup your device configuration files to your computer and to 
restore your configuration files to the devices. To access this screen click 
Maintenance > Device Configuration Backup and Restore.

Figure 89   

Maintenance > Device Configuration Backup and Restore

The following table describes the labels in this screen.

Table 62   

Maintenance > Device Configuration Backup and Restore

LABEL

DESCRIPTION

Device Type

Select from the drop-down list box the type of devices you wish to 
display in the table below.

Device Name

Select the device you wish to back up or restore the configuration 
file. You can select multiple devices.

Search Device...

Click the Search Device... button to find or locate a device (or 
node). See 

Section 3.9.3.1 on page 56

 for more details.

Add

Click Add to add the selected devices you wish to back up or restore 
the configuration file. The devices will be added to the device table 
on the right.

Remove

Click Remove to delete any selected devices from the table on the 
right. This means their configuration files will not be backed up or 
restored.

Operation

Select Backup to transfer the configuration file from your device to 
a computer.

Select Restore to transfer the configuration file from your computer 
to a device.

Summary of Contents for NetAtlas





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands