ZyXEL Communications NBG7815, User Manual, Page: 75 / 186

Chapter 8 Applications
NBG7815 User’s Guide
75
8.4.2 FTP Server
Use this screen to set up file sharing through the NBG7815 using FTP and create user accounts.
Click USB Application > FTP to show the following screen.
Figure 35 USB Application > FTP
The following table describes the labels in this screen.
USB Specify the user’s access rights to the USB storage device which is connected to the
NBG7815’s USB port.
Read & Write – The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read – The user has read rights only and cannot create or edit the files on the
connected USB device.
None – The user cannot access the files on the USB devices connected to the USB
port.
APPLY Click APPLY to save your changes back to the NBG7815.
CANCEL Click CANCEL to exit the screen without saving.
Table 22 USB Application > SAMBA > Add Rule (continued)
LABEL DESCRIPTION
Table 23 USB Application > FTP
LABEL DESCRIPTION
Enable FTP Select this to enable the FTP server on the NBG7815 for file sharing using FTP.
Port You may change the server port number for FTP if needed. However, you must use the same
port number in order to use that service for file sharing.
User Accounts Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
No. This is the index number of the user account.