ZyXEL Communications NBG7815, User Manual, Page: 47 / 186

NBG7815 User’s Guide
47
C
HAPTER
5
Web Configurator
5.1 Overview
This chapter describes how to access the NBG7815 Web Configurator and provides an overview of its
screens.
The Web Configurator is an HTML-based management interface that allows easy system setup and
management through Internet browser. Use a browser that supports HTML5, such as Microsoft Edge,
Internet Explorer 11, Mozilla Firefox, or Google Chrome. The minimum recommended screen resolution is
1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your computer.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
5.2 Accessing the Web Configurator
1
Make sure your NBG7815 hardware is properly connected (refer to the Quick Start Guide).
2
Launch your web browser.
3
If the NBG7815 is in Standard Mode (the default mode), enter "http://zyxelwifi.com" in the browser’s
address bar.
To see the standard mode features, go to Table 8 on page 51 .
If the NBG7815 is in Bridge Mode , enter “http:// (DHCP-assigned IP)” in the browser’s address bar.
To see the bridge mode features, go to Table 9 on page 53 .
4
On the displayed login screen, log in using your myZyxelCloud user name and password or the local
password.
Note: If this is the first time you are accessing the Web Configurator or if the device has been
reset, you must complete the setup wizard, see Chapter 3 on page 24 .
Note: For setting and changing the local password, see Section 13.4 on page 138 .