ZyXEL Communications NBG7815, User Manual, Page: 113 / 186

Chapter 10 Wireless LAN
NBG7815 User’s Guide
113
10.3 Guest WiFi
This screen allows you to enable and configure guest WiFi network settings on the NBG7815.
Click Settings > WiFi > Guest WiFi to show the following screen.
Note: This is not available if you are using bridge mode.
Figure 59 Settings > WiFi > Guest WiFi
The following table describes the labels in this screen.
APPLY Click APPLY to save your changes back to the NBG7815.
CANCEL Click CANCEL to reload the previous configuration for this screen.
Table 36 Settings > WiFi > Main WiFi (continued)
LABEL DESCRIPTION
Table 37 Settings > WiFi > Guest WiFi
LABEL DESCRIPTION
Enable Guest
WiFi Select Enable to activate the guest WiFi. Select Disable to turn it off.
Name (SSID) An SSID profile is the set of parameters relating to one of the NBG7815’s BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a WiFi device is associated.
This field displays the name of the WiFi profile on the network. When a WiFi client scans for an AP
to associate with, this is the name that is broadcast and seen in the WiFi client utility.
Security Mode Select the security mode you want to apply to the NBG7815. See Encryption on page 108 for
more information on security mode.
Password The password has two uses.
• Manual: Manually enter the same password on the NBG7815 and the client. Enter 8 – 63
ASCII characters or exactly 64 hexadecimal (‘0 – 9’, ‘a – f’) characters.
• WPS: When using WPS, the NBG7815 sends this password to the client.
Click the Eye icon to show or hide the password of your WiFi network. When the Eye icon is
slashed , you will see the password in plain text. Otherwise, it is hidden.