manualshive.com logo in svg

ZyXEL Communications NBG-418N v2, User Manual, Page: 33 / 228

Share
Download
ZyXEL Communications NBG-418N v2 User Manual Download Page 33

 Chapter 4 Modes

NBG-418N v2 User’s Guide

33

4.2.1.1  Summary: DHCP Table    

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to 
obtain TCP/IP configuration at start-up from a server. You can configure the NBG-418N v2’s LAN as 
a DHCP server or disable it. When configured as a server, the NBG-418N v2 provides the TCP/IP 
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on 
that network, or else the computer must be manually configured.

Click the 

DHCP Table (Details...) 

hyperlink in the

 Status 

screen. Read-only information here 

relates to your DHCP status. The DHCP table shows current DHCP client information (including 

IP 

Address

, 

Host

 

Name

 and 

MAC Address

) of all network clients using the NBG-418N v2’s DHCP 

server.

Figure 21   

Summary: DHCP Table

Link-Local Address

This field displays the link-local IP address of the NBG-418N v2 LAN port. A 
link-local address is similar to a “private IP address” in IPv4. You can have the 
same link-local address on multiple interfaces on a device. 

LAN Address

This field displays the IPv6 LAN’s IP address.

System Status

Operation Mode

This field shows the device operation mode: 

Router

, 

Access Point

, or 

Universal Repeater

.

System Up Time

This is the total time the NBG-418N v2 has been on.

Current Date/Time

This field displays your NBG-418N v2’s present

 

date and time.

System Setting

- Firewall

This shows whether the firewall is active or not.

- UPnP

This shows whether UPnP is active or not.

Summary

DHCP Table

Use this screen to view current DHCP client information. Click “

Details

” to see 

the screen. 

Packet Statistics

Use this screen to view port status and packet specific statistics. Click 
“

Details

” to see the screen. 

WLAN Station Status

Use this screen to view the wireless stations that are currently associated to 
the NBG-418N v2.

Table 8   

Web Configurator Status Screen (Router Mode) (continued) 

LABEL

DESCRIPTION

Summary of Contents for NBG-418N v2





































































































































































































































Reviews:

No comments