ZyXEL Communications NBG-415N, User Manual

Page: 97 / 155

ZyXEL NBG-415N User’s Guide
97 Chapter 7 Advanced
Figure 65 Advanced: Inbound Filter
The following table describes the labels in this screen.
Table 39 Advanced: Inbound Filter
LABEL DESCRIPTION
Add Inbound Filter Rule
Name Enter a descriptive name (up to 16 characters) for this filter setting. This is for
identification purposes only.
Action Select Deny to block packets from the specified IP address(es).
Select Allow to forward packets from the specified IP address(es).
Source IP Range
Enable Select this option to activate the filter action on the specified IP address range.
Clear this check box to disable the filter action on the IP address range.
Source IP Start Enter the start of the source IP address range.
Source IP End Enter the end of the source IP address range.
Save Click Save to save the settings in this part of the screen.
Clear Click Clear to start configuring this part of the screen again.
Inbound Filter Rules List
Name This field displays the name of the inbound filter.
Action This field displays the action on the packets from the specified IP address range.
Source IP Range This field displays the source IP address range(s).