ZyXEL Communications NBG-415N, User Manual

Page: 104 / 155

ZyXEL NBG-415N User’s Guide
Chapter 8 Tools 104
8.2 System Time and Date
To change your ZyXEL Device’s time and date, click Tools > Time . Use this screen to
configure the ZyXEL Device’s system time based on your local time zone.
Enable Remote
Management
Remote management allows you to allow access to the ZyXEL Device web
configurator from the WAN.
Select this option to activate this feature and set the fields that display below.
Clear this check box to disable this feature.
Remote Admin
Port
Enter the port number to access the ZyXEL Device for device management over
the WAN.
For example, if you enter 8080 in this field and the WAN IP address of the ZyXEL
Device is 172.23.37.205, then you must enter http://172.23.37.205:8080 to access
the web configurator on the ZyXEL Device.
Remote Admin
Inbound Filter
Select an inbound filter from the drop-down list box to restrict remote management
access to your ZyXEL Device over the WAN. You can select the default filters to
allow or deny all access.
You can configure a customer inbound filter in the
Inbound Filter screen (click
Advanced > Inbound Filter ). Refer to Section 7.10 on page 96 for more
information.
UPNP
Enable UPNP Select this option to activate this feature.
Web Configurator
Language
The web configurator on the ZyXEL Device is multilingual.
Enable Auto
Detection
Select this option to set the web configurator to automatically detect and display
the interface in your language.
Table 42 Tools: Admin (continued)
LABEL DESCRIPTION