ZyXEL Communications MSC1000G Series, User Manual

Page: 616 / 1168

Chapter 16 VoIP
Management Switch Card User’s Guide
616
16.3.3 USA Call Transfer
Do the following to transfer an incoming call (that you have answered) to another phone.
1
Press the flash key to put the caller on hold.
2
When you hear the dial tone, dial “*98#” followed by the number to which you want to transfer the
call. to operate the Intercom.
3
After you hear the ring signal or the second party answers it, hang up the phone.
16.3.4 USA Three-Way Conference
Use the following steps to make three-way conference calls.
1
When you are on the phone talking to someone (party A), press the flash key to put the caller on
hold and get a dial tone.
2
Dial a phone number directly to make another call (to party B).
3
When party B answers the second call, press the flash key to create a three-way conversation.
4
Hang up the phone to drop the connection.
5
If you want to separate the activated three-way conference into two individual connections (with
party A on-line and party B on hold), press the flash key.
6
If you want to go back to the three-way conversation, press the flash key again.
7
If you want to separate the activated three-way conference into two individual connections again,
press the flash key. This time the party B is on-line and party A is on hold.
16.4 The VoIP ARP Screen
Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP
address) to a physical machine address, also known as a Media Access Control or MAC address, on
the local area network.
Use the VoIP ARP screen to manage the IP addresses assigned to the VoIP cards in the IES.
Click VoIP > ARP . The following screen displays.
Figure 414
The VoIP > ARP Screen